Best Answers

Week	Winner
8/24/09	tappc answers Pilot Bearing failures with Eaton Ultrashift Trans?
8/3/09	imcubby answers Anyone using a ClimaCab?
7/27/09	jstoy answers Is anyone seeing extreme steer tire wear on cascadias with Rack and Pinion
7/13/09	ed answers Is anyone experiencing increased ujoint failures due to lack of lube?
7/6/09	ldsdiesel answers Is anyone experiencing increased ujoint failures due to lack of lube?
6/8/09	lindajoy answers Where are you cleaning your DPFs
6/1/09	tomw answers Where are you cleaning your DPFs ?
5/25/09	ldsdiesel answers Technician's Heavy duty Diesel Technician & Supervisor/Manager "
5/11/09	william_dodson answers Are you experiencing oil or fuel filter plugging issues?
5/4/09	tomw answers Are you experiencing oil or fuel filter plugging issues?
4/27/09	tappc answers DD15 filters. Any crossover filters yet? Or only Detroit
4/20/09	tappc answers Anybody have real life experience with Anderson Eco-Flaps?
4/13/09	qsc515 answers Has anyone had wheel seal failures with the Cascadias?
4/6/09	tappc answers Have any Fleets seen any decrease in tires and related Petroleum products
3/30/09	Tire Guy answers Have any Fleets seen any decrease in tires and related Petroleum products?
3/23/09	sgray answers Have you seen a recent increase of starter "Tapping"?
3/16/09	fleetmgr answers Have you seen a recent increase of starter "Tapping"?
2/23/09	sgray answers After hour on call technicians and person answering phones.
2/16/09	fleetmgr answers After hour on call technicians and person answering phones.
2/9/09	tappc answers Nitrogen Inflated Tires
2/2/09	fleetmgr answers "06 Peterbilt with ISX motor, AC Delco alt. spikes to 18 volts.
1/26/09	Tire Guy answers a question about Nitrogen Inflated Tires
1/19/09	longc answers Is anyone experiencing fuel filter clogging on Detroit Series 60 Engines?
1/5/09	fleetmgr answers Do you have battery, charging, and starting problems with 9400 Navistars?
10/20/08	mikewalsh answers Have you seen damaged electrical systems in Cascadias due to water leaks?
9/15/08	tappc answers How many here use COM DATA cards in their fleet operations?
9/8/08	fleetmgr answers Would you support a change from Flooded Cell to AGM batteries?
9/1/08	tappc answers Anyone having lube filter plugging issues on new ISX using a Fleetguard LF9001
8/18/08	jstoy answers apu ??? Carrier or Thermo King
8/11/08	tappc answers apu ??? Carrier or Thermo King
8/4/08	fleetmgr answers When you are cutting back on your speeds are you checking your specs?
7/28/08	tappc answers Any website that calculates fuel savings with various speeds?
7/21/08	ldsdiesel answers Has anyone used the "Anderson Mudflap" they are boasting a huge fuel saving ?
7/14/08	DaleK answers I need some good information about tire wear, tire placement, and tire size .
6/23/08	fleetmgr answers How many fleets have taken single wide based tires off and why?
6/16/08	tappc answers How many fleets have taken single wide based tires off and why?
6/9/08	tappc answers Bypassing speed sensor for top speed,which output shaft sensor
5/26/08	lindajoy answers Has anyone ran Super Singles on 18 wheelers and had a bad expierence?
5/12/08	BV2378 answers Has anyone ran Super Singles on 18 wheelers and had a bad expierence
4/21/08	ldsdiesel answers What is cutoff psi on your air ride air circuit?
4/7/08	mikewalsh answers Is anyone having trouble finding a quality parts supplier?
3/31/08	fleetmgr answers 1995 volvo detroit motor 60 series 450 hp. loses power around 65 mp hour. foot
3/24/08	longc answers Is IdleAire a viable idling solution?
3/17/08	BV2378 answers a question about Single Wide Based Tires
3/3/08	tappc answers Tire inflations and monitoring system's
2/25/08	lindajoy answers a question on Tire inflations and monitoring system's
2/18/08	fleetmgr answers a question about Tire inflations and monitoring system's
2/4/08	tomw answers What do you do when fuels are mixed, LSD and ULSD?
1/21/08	tappc answers a question about excessive inside tread wear on bridgestone 726el
1/14/08	lindajoy answers What do you do when fuels are mixed, LSD and ULSD?
1/7/08	mikewalsh answers Is anyone experiencing problems on vehicles equipped with Axilox nuts?
12/17/07	mikewalsh answers a question about Roll off container safety
12/3/07	mikewalsh answers where can I purchase single wide tires for my tractor
11/26/07	tappc answers Anyone heard of the Revelation System for Trucks?
11/19/07	tappc answers Does anyone have any experience with the Nite battery operated a/c climate syst
11/12/07	lindajoy answers a qustion about Maintenance Facilty
10/29/07	frankm answers Allowed time of Tool Trucks at your shops with Technicians
10/22/07	fleetmgr answers Allowed time of Tool Trucks at your shops with Technicians
10/15/07	mikewalsh answers Cat C12 engine stays at 130 to 155 temp, replace all sensors, radiator , etc,
10/8/07	mikewalsh answers Is there a consensus as to whether single wide base tires are a good thing?
10/1/07	ed answers Is there a consensus as to whether single wide base tires are a good thing?
9/10/07	fleetmgr answers Class B CDL to drive a tractor w/o a trailer?
9/3/07	ed answers Broken shocks on trailers what remedies are available?
8/27/07	tappc answers a question about Construction bidding, accounting, equipment maintenance software.
8/13/07	mikewalsh answers I have a 2003 Volvo VE. The air horns dont work. There cab mount and steering
8/6/07	RobM answers Does anyone have any experience with Stemco "Pro-Torq" axle spindle nuts?
7/30/07	frankm answers Has anyone tested the ECU calculated MPG vs actuals?
7/23/07	tappc answers Catalist burning mufflers and idle laws?
7/16/07	kingoftheroad6 answers Volvo 2006 VNL64T300 vibration issues-any answers
7/9/07	tappc answers Has anyone tested the ECU calculated MPG vs actuals?
6/25/07	fleetmgr answers Is it normal for a DT-466 to run at 200 to 220 degrees?
6/18/07	fleetmgr answers Any problems with using Ultra Low Sulfur Diesel?
6/11/07	burkeweems answers Any problems with using Ultra Low Sulfur Diesel?
6/4/07	keno19602000 answers I need info on adjusting axilok with bearing spacers
5/28/07	frankm answers I need info on adjusting axilok with bearing spacers.
5/21/07	Greg answers What are the pro's and con's of running cummins over detroits?
5/14/07	Greg answers a question about Trailer ICC bumber
5/7/07	ed answers Is anyone putting a residual value on APU's and adding it to your resale value?
4/30/07	frankm answers a question on Trailer ICC bumber
4/23/07	tappc answers Carrier Comfort Pro or Rigmaster APU.
4/16/07	frankm responds to trucking topics
4/9/07	tappc answers FleetXchange is seeking your input on EGR Engines
3/26/07	tappc answers a question about Series 60 Detroits
3/19/07	frankm answers Did anyone experience unusual filter plugging with ULSD?
3/5/07	ldsdiesel answers Does anyone has experience with rear view cameras for straight trucks?
2/26/07	frankm answers a question about retreaded tires
2/12/07	fleetmgr answers Anyone have any experience using Bio Fuels?
2/5/07	fleetmgr answers What type of uniform material do your technicians where?
1/15/07	tappc answers What type of Power Invertors do you use?
1/8/07	fleetmgr answers a question about Cold weather additives and ultra low sulfur diesel
1/1/07	mikewalsh answers a question about super single tires
12/4/06	frankm answers Commercial Trailer Inspections
11/13/06	tappc answers Printed tire programs?
11/6/06	ldsdiesel answers Have you seen Blown Fuses on 7way Center Wire?
10/30/06	frankm answers How do you keep your shop most productive?
10/23/06	fleetmgr answers Do you use Tire tracking systems?
10/16/06	tappc answers Do you use Tire tracking systems?
10/9/06	mikewalsh answers a question about Mexican trucks operating in U.S.
10/2/06	tappc answers Has anyone experianced higher componate failures due to EGR engine temps?
9/25/06	robert5585 answers Is a medical card required to operate a vehicle with air brakes?
9/11/06	tappc answers Exhaust Brakes - will they be available in 2007 on new Med. Duty Trucks?
9/4/06	fleetmgr answers What causes a empty end dump trailer to lock up during braking?
8/14/06	fleetmgr answers How do you do a pilot inspection on a new vehicle? truck or trailer?
8/7/06	mikewalsh answers Any one have a good way of keeping trailer sliders lubed for use?
7/31/06	tappc answers Anyone have any experience with security locks for dash parking brake valves?
7/17/06	ldsdiesel answers Any one have a good way of keeping trailer sliders lubed for use?
7/10/06	tappc answers a questions about Truck washing system's
6/19/06	tappc answers Has anyone heard of Hydrogen Fuel Injection Systems for diesels?
6/12/06	fleetmgr answers looking for some guidelines for driver accident policys
5/29/06	TTech answers How to pull accessory drive on cummins n14?
5/22/06	tappc answers LOOKING FOR SOME FEEDBACK ON RENTAR FUEL CATALYST SYSTEM?
5/15/06	robertmileur answers a questions about contaminated brake shoes
5/1/06	frankm answers replace or not - contaminated brake shoes?
4/24/06	tappc answers a questions about Driver retention
4/17/06	fleetmgr answers a question about HEUI Systems.
4/10/06	kptruck answers a questions about HEUI Systems.
4/3/06	fleetmgr answers What, if anything, are you doing to your air systems with EGR engines?
3/27/06	frankm answers Meritor Bushings on Great Dane Trailer? Any Problems?
3/20/06	frankm answers Hybrid Diesel Electric Refrigeration Unit from Carrier? Would you try it?
3/13/06	jstoy answers Hybrid Diesel Electric Refrigeration Unit from Carrier? Would you try it?
2/20/06	tappc answers Liftgate Spec. Tuck Under or Rail Gate? Which is Better?
2/13/06	joyfoto answers Automatic Tire Inflation Systems? Are they worth it?
2/6/06	tappc answers Automatic Tire Inflation Systems? Are they worth it?
1/30/06	The Maker Of Things answers Does anybody Use Pro-Link diagnostics?
1/23/06	caine answers Mack AC355 engines, anyone have any experience running them?
1/16/06	robertmileur answers Anyone using anti-fuel theft devices? Which ones work?
1/9/06	fleetmgr anwsers a question about idle reduction aids
1/2/06	tappc answers Holland or Fontaine? Which is preferred
12/19/05	The Maker Of Things answers What scan tool do you use in your shop, and how useful is it?
12/5/05	frankm answers Does anyone know of a complete kit for Fontaine 5th wheels?
11/28/05	fleetmgr answers Looking for a Engine Block Heater. What Works Best?
11/21/05	frankm answers Is a cdl required on a truck with air brakes under 26000 lbs?
11/14/05	frankm answers Are you "burnishing" brakes after replacing shoes?
10/31/05	frankm answers What's the recommended filter change interval for the meritor power divider?
10/24/05	fleetmgr answers What's the recommended filter change interval for the meritor power divider?
10/17/05	mikewalsh answers Do you use company customized mudflaps?
10/3/05	tappc answered Are you happy with Michelin Widebase Tires?
9/26/05	fleetmgr answers Are you happy with Michelin Widebase Tires?
9/19/05	pgtparts answers I am looking to purchase mudflaps for step vans with our logo on them (18'' wid
9/12/05	fleetmgr answers What types of changes would you like to see on FleetXchange?
9/5/05	The Maker Of Things answers What things need to be considered when specking multi temp trailers?
6/27/05	fleetmgr answers Has anyone had experience with Centron fuel additive?
6/20/05	jwordekemper anwers Has anyone had experience with Centron fuel additive?
6/13/05	jhw505 answers Why would someone choose a manual transmission over an automatic one?
6/6/05	Vince D answers Determining Cost Per Mile
5/30/05	robertmileur answers Determining Cost Per Mile
5/23/05	fleetmgr answers How do your drivers check brake stroke in their pre trip inspection?
5/16/05	frankm answers How do your drivers check brake stroke in their pre trip inspection?
5/9/05	fleetmgr anwsers R134a recharge cans with sealants.
5/2/05	G.AMADO answers Can anyone provide an average MPG for this engine in SAC or TAC applications running around 100,000 miles per year?
4/25/05	The Maker Of Things answers Any options for preventing Lift Gate Batteries from Dying?
4/18/05	tappc answers Experiences with Battery Conductance Testers?
4/11/05	tappc answers What is the procedure for adjusting valves and inj. on a nt400 cummins with stc?
4/4/05	frankm answers PREVENTIVE MAINTENANCE INSTED OF PARTS FAILURE
3/28/05	fleetmgr amswers PREVENTIVE MAINTENANCE INSTED OF PARTS FAILURE?
3/21/05	tappc answers No pulling power with the ISX engine, what can be done to correct?
3/14/05	dlhanson anwsers How long should a clutch last?
3/7/05	tappc anwsers How do you reward your Driver of the Year?
2/21/05	tappc anwsers Premature starter failures w/ISX Cummins
2/14/05	tommol answers Can you drive a truck w/ air brakes w/o a CDL? If so, where is it referenced?
2/7/05	frankm answers Can you drive a truck w/ air brakes w/o a CDL? If so, where is it referenced?
1/31/05	kevin.gass answers Any one testing Electronic On Board Recorder's (EOBR's)?
1/24/05	jstoy anwsers Non CDL straight trucks with air brakes. Do they require CDL license?
1/17/05	Dave C anwsers Non CDL straight trucks with air brakes. Do they require CDL license?
1/10/05	ed answers What ratio of refrigerated trailers do you operate that are single temp?
1/3/05	frankm anwsers Non CDL straight trucks with air brakes. Do they require CDL license?
12/27/04	DaleK answers What is the law on repairing a steer tires?
12/20/04	jhw505 answers Is anyone using an Auxiliary Power Unit for their tractors?
12/13/04	wheeldon.jamie answers Consignment parts: What percent of your parts in your shop are on consignment?
12/6/04	Robert Mileur answers I am looking for a dependable repair facility for trucks in Alexandria, VA?
11/29/04	ed answers Anybody using Hendrickson Air inflation systems?
11/22/04	LDS answers Is anyone using the new Michelin, Wide based single tires?
11/15/04	mikewalsh answers Is anyone using the new Michelin, Wide based single tires?
11/8/04	Robert Mileur answers What is the maximum miles per hour allowed for power units?
11/1/04	Robert Mileur answers Has anyone had exp. w/aux. a/c/heaters for sleepers?
10/25/04	joyfoto answers Choosing on-board truck communications
10/18/04	jfrieze answers Choosing on-board truck communications
10/11/04	fleetmgr answers on Anyone using nitrogen to inflate tires?
10/4/04	DFrehner answers Anyone using nitrogen to inflate tires?
9/27/04	ZCAR302 answers How many hours do trucks give shippers on appointed times to load the trucks?
9/20/04	Greg answers Where do you get your Truck Matresses?
9/6/04	petehuisenga answers Which tires are best suitable (best retreads) for heavy duty off road vehicles?
8/30/04	Donnie Earl answers Is there real value with purchasing an extended warranty for my refrigeration unit?
8/16/04	Donnie Earl answers Do strip curtains really help with recovering your box temperatures?
8/9/04	Donnie Earl answers on What is the benefit of using synthetic motor oil in your reefer?
8/2/04	jstoy answers Hendrickson air ride trailer bags folded under how to prevent?
7/26/04	tappc answers With the new designed front end on the Volvo VNL64T300 tractor, are drivers complaining of the lack of forward lighting from the way the headlights are positioned?
7/19/04	BuckD. answers Anybody using the new Alcoa Durabright wheels?
7/12/04	frankm answers on Is anyone here involved with trailer fleet maintenance/management?
7/5/04	cricciardi answered Is anyone here involved with trailer fleet maintenance/management?
6/28/04	ed answered on Aluminum wheels versus Steel wheels.
6/21/04	tappc answers on Anybody using Idle Shutdown Feature?
6/14/04	Robert Mileur answered Does anyone have a good lock out tag out sytem for trucks being worked on in sh
6/7/04	tappc answers can driver time restrictions and slowing for fuel economy be managed?
5/31/04	fleetmgr answers how do you manage multiple shops?
5/24/04	Robert Mileur answers what is the best way to clean oil from an intercooler after a turbo failure?
5/17/04	ITTCO answers Does anyone use RFID technology to inventory equipment?
5/3/04	tappc answers What is a good way to handle windshield claims?
4/26/04	fleetmgr answers Is any one using bio-diesel?
4/19/04	mikewalsh answers How much oil is needed for a Detroit series60 motor?
4/12/04	fleetmgr answers Does anyone have a general specifications for lube oil?
4/5/04	frankm answers When welding on trailers, should the ecu for the abs system be disconnected?
3/29/04	mikewalsh answers Where can I get signal light lenses?
3/22/04	tappc answers the question Are there some new securement regulations involving tie-down chains & straps?
3/8/04	Vince D answers We are looking to build a maintenance facility. Are pits a good thing?
3/1/04	beancounter answers the question "I need recomendations for dispatch software"
2/23/04	Greg answers the question Anyone doing dry pm service between wet services? and at what intervals?
2/9/04	tappc answers the question Deer Whistles...anyone use them?
2/2/04	frankm answers the question What adapters/ software do you use for diagnostics?
1/26/04	Tireguy answers what causes steer tires to wear on outsides?
1/19/04	emmit75 answers the question: What happens if connect a DDEC III to a IV /11.1 both, just to ride 300 kms?
1/12/04	truckwriter answers What is a good way to heat my hydraulic oil reservoir tank while driving?
1/5/04	frankm answers How do I stop the vibration of front brakes when in reverse?
12/29/03	jfrieze answers the question if a detroit series 60 looses its values, how can I get them back?
12/22/03	The Maker Of Things answers a question about tank truck related safety training
12/15/03	frankm answers a question about Pro-Link software
12/8/03	The Maker Of Things answers the question Is there a market for used adjustable refer bulkheads? Can they be retrofitted?
12/1/03	frankm answers Do mechanics, with CDL's, have to fill out a log when working over 12 hours?
11/17/03	Greg answers a question about an acceleration problem in a detroit series 60 motor
11/10/03	DFrehner answers a question about oil price hikes
11/3/03	tappc answers a question about problems with Cummins ISX and filters
10/27/03	tappc answers the question what companies are fully equipped with auto-shift transmissions?
10/20/03	tappc answers the question about co's that sell extended warranties for class 8 trucks
10/13/03	fleetmgr answers the question where can you find quality technicians / leadmen?
10/6/03	Bill1919 answers the question about Super Single tires for OTR Fleet?
9/29/03	FrogMaster answers the question Any Ideas for economical Chain storage on Tankers??
9/22/03	twildish1 answers Why are curved windshields cracking?
9/8/03	Greg answers a question about constant clutch replacement problems
8/25/03	DFrehner answers the question asking for help to find twin screw to fit under 37' Relco trl ?
8/18/03	frankm answers What do you do to assure your scrap tires are actually scrapped?
8/11/03	cgarcia answers Is a Davco fuel/water separator worth spec'ing on a new truck?
8/4/03	jhw505 answers the question anyone had problems with Pre-Set "spacer" wheel ends?
7/28/03	fleetmgr answers What damaging effects do silacare & Armor-all have on tires?
7/21/03	Greg answers how important is the vmrs codes , when tracking down time or cost?
7/14/03	truckwriter answers a question about back up lights on trailers
7/7/03	tappc answers a question about vendor installs of Xata and Qualcom systems
6/30/03	tappc answers Does being a supplier and being ISO certified provide any value to fleets? Or, To the customers you have?
6/23/03	tappc answers a question about using the new DD series 60 EGR motor
6/9/03	randyroy59 answers a question about Thermo King and Carrier resale values
6/2/03	tappc answers a question about PSI tire inflation systems
5/26/03	tappc answers a question about lawsuits
5/19/03	NeilB answers a question about DOT regs on dry bulk tankers and body fenders
5/12/03	cgarcia answers Is there an over-the-road battery program that works?
5/5/03	twildish1 answers Is there an over-the-road battery program that works?
4/28/03	bvinson answers a question about salary caps for drivers
4/21/03	jwordekemper answers Is anyone using the Xata On Board computer system?
4/14/03	Robert Mileur answers Does anyone have an idea what an average % to revenue ratio would be for maintenace costs?
4/7/03	Vince D answers Does anyone have an idea what an average % to revenue ratio would be for maintenace costs?
3/31/03	Chuck Lewis answers a question about experience with a ticking noise...
3/24/03	BWGOINS answers a question about Carrier VS Thermo King Reefers
3/17/03	djingram answers a question about fires in trucks
3/10/03	robert5585 answers CAN U-JOINTS BE GREASED TOO OFTEN CAUSING PREMATURE FAILURE?
3/3/03	cgarcia answers the question What are the pros and cons of using a Maple wood trailer floor?
2/24/03	fleetmgr answers a question about regulations that govern keeping drivers and plants personnel safe
2/17/03	Greg answers a question about useful life & depreciating tractors and trailers
2/10/03	mmasters answers a question about factoring your invoices?
2/3/03	tappc answers a question about THE SUMAG FUEL SAVER
1/27/03	blue_seal_bill answers a question about registering trailers in Maine
1/20/03	frankm answers a question about PM schedules for Auto slacks and their pins
1/13/03	Vince D answers a question about industry standard for miscellaneous maintenance charges
12/30/02	jstoy answers the question Anyone having failures on C-12 turbos?
12/16/02	fleetmgr answers the question Is anyone using a hydralic tank heaters to warm oil before starting there unit?
12/9/02	fleetmgr answers the question Could automatic belt tensioners be responsible for fan drive bearing failures?
11/25/02	david.cowlbeck answers If $15 per tire adds one extra retread per casing, is it worth it?
11/18/02	tappc answers the question Do Puradyn bypass filters really add the TBN additives back to the oil?
11/11/02	Chuck Lewis answers a question about Evans Coolant
11/4/02	mudy answers Is anyone running the Mercedes MBE 900 and if so, how are they doing?
10/28/02	pauls answers Where can reefer fuel tank locking caps be purchased?
10/21/02	Bill1919 answers a question about regular vs. permanent antifreeze
10/14/02	frankm answers how does your company handle cdl requirements for the 10001 - 26000 gvw
10/7/02	fleetmgr answers the question What do you think of Shell RotellaT?
9/30/02	tappc answers Is anyone using locking fuel tank caps?
9/23/02	jhw505 answers Do you allow use of Power Inverters in trucks?
9/16/02	lanner answers the question "Any FleetExchangers using bio-diesel either voluntarily or by mandate?"
9/9/02	jhw505 answers What is your policy on drivers making changes to trucks?
9/2/02	truckwriter answers a question about maintenance facilities
8/26/02	gcfinc answers a question about converting to synthetic oil
8/19/02	fleetmgr answers a question about Dayton and Bridgestone tires
8/12/02	cryoung answers a question about On Board Management Systems
8/5/02	tappc answers a question about Wheel-end failures with ConMet Preset hubs and PSI Tire Inflation Systems?
7/29/02	zzsilverave answers When should you change shocks?
7/22/02	wiedtrans answers What are you doing about Detroit Series60 return fuel lines?
7/15/02	jhw505 answers a question about adding air conditioning to yard tractors
7/8/02	gcfinc answers Is anyone running EGR engines yet?
7/1/02	tappc answers Is anyone running EGR engines yet?
6/24/02	Greg answers a question about air pressure and irregular wear
6/17/02	The Maker Of Things answers "What inspection procedure is being used for tie rod ends and drag links?"
6/10/02	emmit75 answers "How do you keep drivers from OverIdleing?"
6/3/02	Chuck Lewis answers a question about devices that can tell about idle time, stops, breaks etc.
5/27/02	fleetmgr answers a question about life cycles of company cars/pickup trucks
5/20/02	pauls answers, "Is anyone removing the lower half of the backing plates on your wheels?"
5/13/02	fleetmgr answers a question about policies on extensive and expensive tech training
5/6/02	The Maker Of Things answers
4/29/02	emmit75 answers a question about using a power streering pump to also operate hydraulic fuctions
4/22/02	jhw505 answers how many techs should be in a fleet?
4/15/02	joyfoto answers a question about the pro's and con's with using owner operaters.
4/8/02	Rick!! Answers a question about reward programs
4/1/02	frankm Answers a question about Unitized Axilok nuts
3/25/02	Jimmy3 answers a question about Volvo engine oil leaks
3/18/02	Chuck Lewis answers a question about radiator life in class 8 trucks?
3/11/02	KW nut answers the questions, Do you use Auto Balancers in Tires? Which One?
3/4/02	jauer answers the question, Which electrical connectors or connections give you the most trouble?
2/25/02	fleetmgr answers question on Rockwell thrustwashers wearing out
2/18/02	dan shares his expertise on fifth wheel tolerances
2/11/02	KW nut explains how often he rotates tires
2/4/02	tappc adds to the discussion on measuring technician productivity
1/28/02	VMRS author explains his own method for measuring technician productivity
1/21/02	Rick!! answers question on measuring technician productivity
1/14/02	Donnie Earl answers question on insurance responsibilities and contract carriers
1/7/02	tappc answers question on Goodyear retreads
12/31/01	fleetmgr answers the question, What is the best steer tire for my application?
12/17/01	Greg answers question on temperature monitoring
12/10/01	fleetmgr answers the questions, Which batteries are best? How do you test them?
12/3/01	fleetmgr shares his experience with blending fuel for winter
11/19/01	Rick!! answers question on using LED lights
11/19/01	tappc answers question on using LED lights
11/12/01	Chuck Lewis offers a few suggestions for naming your company
10/29/01	rbraswel answers question on ATA or VMRS codes
10/22/01	Chuck Lewis comments on automatic grease systems
10/22/01	fleetmgr comments on automatic grease systems
10/15/01	mudy critiques the Fuelman program
10/8/01	fleetmgr answers question on alternative fuel options
10/1/01	Greg answers question on cost per mile tire expenses
9/24/01	fleetmgr provides input on the pros and cons of super-single tires
9/17/01	Greg discusses the cost-effectiveness of 10-yr old trucks
8/27/01	frankm explains how to prevent electrical terminal corrosion
8/20/01	tappc answers question about policies on driver installed electrical equipment
8/13/01	doain talks about municipalities spec'ing AC in their trucks
8/6/01	johnlampsa discusses 5w40 mineral based motor oil
7/30/01	Greg answers question on the ratio of mechanics to equipment
7/30/01	frankm answers question about the ratio of mechanics to equipment
7/23/01	fleetmgr offers advice on good light truck tires
7/16/01	chayeral provides a mathematical approach to vehicle replacement
7/9/01	fleetmgr for his two part answer on the purpose of oil analysis
6/25/01	fleetmgr answers question about drivers who fail random or post-accident screenings
6/18/01	tappc discusses his experience with autoshift transmissions
6/11/01	Greg suggests how to switch a fleet to LED lights
6/4/01	fleetmgr answers question on oil intervals using Citgo 600 motor oil
5/28/01	jauer explains where to find repair time standards info on a CD
5/21/01	fleetmgr suggests how you can improve your success with washed filters
5/14/01	SIMPLE MAN discusses the ins and outs of wheel alignment
5/7/01	fleetmgr shares his experience with reusable oil filters
4/30/01	sgray answers question on Napa filters
4/30/01	Greg answers question on Napa filters
4/30/01	fleetmgr explains how he chooses brake linings for a reline
4/16/01	fleetmgr explains how he chooses brake lining when performing a brake reline
4/9/01	jmr answers question about finding/retaining fuelers and washers
4/2/01	Greg discusses standards of operation in a garage
4/2/01	skmyers also discusses standards of operation in a garage
3/26/01	SIMPLE MAN explains why buying auxilliary heaters can be worth it
3/19/01	fleetmgr provides insight on the value of filter washing
3/12/01	Greg explains the difference between residual and fair market value
3/5/01	fleetmgr discusses tire sealants
2/26/01	GYPSUMMAN explains about governing maximum truck speeds
2/19/01	tappc answers question on Class 8 drive tire mileage
2/12/01	Buster Knuckles explains the Stemco Pro-torq nut system
2/12/01	fleetmgr provides resources for info on cat dual fuel cng/diesel engines
2/5/01	Jimmy3 discusses oil drain quick fitting
1/29/01	fleetmgr discusses secondary containment requirements
1/22/01	mudy explains hazmat requirements
1/15/01	tappc provides detailed advice on DAVCO fuel water separators
12/18/00	jauer explains what big tools you need in a shop
12/11/00	tappc identifies some problems with truck cabs
12/4/00	chayeral discusses truck cab problems
11/27/00	chayeral provides valuable insight on dismountable truck bodies
11/20/00	jcurley addresses the question: Is AVL technology worth the cost?
11/13/00	fleetmgr explains how his fleet buys parts online
11/6/00	mudy advises on how to recover fuel taxes
10/30/00	mudy explains the law on VCR sign offs
10/23/00	tappc explains if used oil heater is good investment
10/16/00	mudy discusses apportioned plate requirements
10/9/00	ed explains how to maximize dual tire life
10/2/00	ASE Mechanic offers advice on avoiding wrecker company rip-offs
9/25/00	Bob offers advice about electric fuel pumps
9/18/00	Greg provides insight on setting up fuel purchase agreements
9/11/00	Greg explains how to negotiate truck repair fees
9/4/00	bmayers discusses tire wear on tandom axle trailers
8/28/00	wiedtran offers some ideas on washing the interiors of trailers
8/21/00	bmayers talks about the importance of caster and camber adjustment
8/14/00	dfinch explains How his company handles warranty repairs
8/7/00	william shares the results of his research on software routing packages
7/31/00	Greg answers What should I know about antifreeze?
7/24/00	dfinch talks about his experience with Equal tire additive
7/17/00	Greg suggests how to obtain fair market value for used tractors
7/10/00	demingdevils answers what it means to run the rack
7/3/00	Greg advises on how to find a good truck wash
6/26/00	FSAman answers question on Filter Minders
6/19/00	Greg answers question on Filter Minders